Rapman 3d – Extru 3d

Well, im working on g-code and building my own application.
I encounter some problem with filling the forms and the “extruder off”

The reason is that when extruder is off, ABS continue to go out for tiny time…

here is some pictures

Im devlopping my custom application to generate Gcode.

Here is my first try :

More test for tickiness . Lot of work to do to understand the best compromise

some test

I tryed the calibration test of http://elco.crsndoo.com/reprap/calibrate.html

A usefull script to test some tickiness

First try : a tower to check that Z is not moving . This let me discover something

Tower

Well … Before playing with skeinforge (the “BfB” : bitsfrombytes.com install is cool on wxp 32bits) , i would like to push some test to experiment what can i do with the Rapman v3.1 .

So, let’s go for G-code experiments !

First goal : what sort of line can i do ? What about dashed line ? What about a single dot ? ect.

Time to dev !

Full

Let’s go for the end of the heart box test :

Print end

The bug is for the following reason :

One filament from the ground was not stuck in the ground , so the nozzle touch it and burn it and join it to the print

Plague

The box full :

ended

So, the question is : who is Katia ?!

After a Mug , let’s go for the Heart box. It’s a cool idea, because my wife first question was : “So ? what is the first thing you printed ?” …

– “A heart box, honey, a heart box, just for you !”
– “What wonderfull ! so cute !”
=  good diner

Heart box test

and top

Heart box test rapman 3.1

Well, this test was quite good. I notice some heat problems at the begining, but, finally, looks good

Tomorow, let’s go for the heart box end and a my first custom file if i success to run skeinforge (waiting for netfabb solution ) tonight.

The good one

Well

How to say …. No allen key for engine = no circle

first try

Just clic on the picture.

As you can see, if ther is some move bug in some X or Y axes , it’s done …

2 try

After 4 days building it, here what i can say :

– Doc is amazing
– Switch are too short
– Napoleon did’nt finish the task : the meters specs are cool, finding tools (Allen) for english specs is f…ing sh..t
– My oled has a bug

My suggests to bitsfrombytes :

– Give Allen for engine gears ! 1.8 is impossible to find in the rest of the world !

Now , some pictures :

Connector

OLED

Switch too short so ...